Request Your Custom Quote
Tell us what you need. Our team normally replies within one business day.
How Many Ounces Are in a Can of Pop? Sizes, Codes and Labels
How many ounces are in a can of pop? In the United States, a standard can holds 12 US fluid ounces. That is 354.88 milliliters, which Crown’s catalog lists as 355 mL. Crown, a can maker, lists its standard 12 ounce can at 66 mm across and 122.22 mm tall, about 2.6 by 4.8 inches. The same 12 ounces also comes in a taller, narrower sleek can, and Crown’s and Ball’s lines include 7.5, 16, 19.2 and 24 ounce cans. If you pack drinks in custom beverage boxes, the can’s shape matters as much as its ounces.
Can Sizes in Ounces and Milliliters
| Can | US fl oz | Milliliters | Body diameter × height | Listed by |
|---|---|---|---|---|
| Slim | 5.5 to 8.4 | 162.65 to 248.42 | 53 × 133 mm for a 250 mL slim | Ball (sizes), Crown (250 mL) |
| Sleek, 7.5 oz | 7.5 | 221.80 | 58 × 104.4 mm (2.28 × 4.11 in) | Crown |
| Standard, 12 oz | 12 | 354.88 | 66 × 122.22 mm (2.60 × 4.81 in) | Crown |
| Sleek, 12 oz | 12 | 354.88 | 58 × 156.59 mm (2.28 × 6.16 in) | Crown |
| Standard, 16 oz | 16 | 473.18 | 66 × 157.23 mm (2.60 × 6.19 in) | Crown |
| 568 mL | 19.2 | 567.81 | A 16 ounce can’s diameter, about a 24 ounce can’s height | Ball, 2011 |
| King | 24 and 25.4 | 709.76 and 751.17 | Not published on Ball’s page | Ball |
Milliliters are computed from NIST’s conversion factor for the US fluid ounce, 29.57353 mL, checked in October 2026. Crown’s pages print the rounded figures: 222, 355 and 473 mL. Dimensions are Crown’s published figures, read in October 2026, and Ball’s own description for its 568 mL can.
Same 12 Ounces, Two Shapes, and What 211 Means

Crown’s sleek 12 ounce can is 8 mm narrower and 34.37 mm taller than its standard 12 ounce can. Both hold the same drink. A slot or divider sized for the 66 mm standard can leaves 8 mm of play around a 58 mm sleek can, and a sleek can stands 34 mm taller than the can a standard carton was built around.
Can makers also name sizes with three digit codes. Wikipedia’s article on drink cans says the first digit is whole inches and the next two are sixteenths of an inch. For food cans, its article on steel and tin cans says the Can Manufacturers Institute defines the codes as nominal outside dimensions. Crown’s standard drink can is a 211 × 413:
- 413 high is 4 and 13/16 inches, or 122.24 mm, against Crown’s metric 122.22 mm.
- 211 across is 2 and 11/16 inches, or 68.26 mm, while Crown’s metric field reads 66 mm.
The codes and the metric figures do not always agree, so use the maker’s metric figure when you size anything to fit. The sleek can’s 204.5 works out to 57.94 mm, against Crown’s 58 mm.
Why Measuring the Outside Gives You About 14 Ounces
Treat Crown’s standard can as a plain cylinder 66 mm across and 122.22 mm tall, and it holds 418.1 mL, or 14.14 fluid ounces. The 12 ounces of drink fill 84.9 percent of that. The metal is not a plain cylinder: its bottom is shaped when the can is formed, and the lid, at about 2.13 inches across per Wikipedia, is narrower than the 2.6 inch body.
The formula for a cylinder is π × radius² × height. Two of the guides benchmarked for this post print it as πr², without the height. Their worked figure, 3.14159 × 1.3 × 1.3 × 4.8, does use the height and gives 25.48 cubic inches, which is 14.12 fluid ounces, not 12. Measuring tells you how much room the can takes up. The ounces are on the label.
Can Sizes Outside the US
Wikipedia’s article on drink cans gives these sizes:
| Market | Standard or most common can | In US fl oz |
|---|---|---|
| North America | 355 mL | 12.00 |
| Europe | 330 mL | 11.16 |
| Australia | 375 mL | 12.68 |
| Japan | 350 mL and 500 mL | 11.83 and 16.91 |
Crown lists its 330 mL standard can, 66 × 115.2 mm, for Europe, the Middle East and Africa only. Canada once used 12 imperial fluid ounces, 341 mL, before settling on the US 355 mL size, and 341 mL is only 11.53 US fluid ounces. Ball says its 568 mL size is often called a royal or imperial pint in the United Kingdom.
What the Can and the Carton Have to Say

Under 21 CFR 101.7, FDA’s net quantity rule, which we read for this post in October 2026, a drink states its contents on the main label panel. How a label writes ounces of weight is in our guide to how many grams are in an ounce.
- Fluid ounces, measured at 68 °F (20 °C). A liquid is declared in US fluid measure, at that temperature for a drink not sold frozen or refrigerated.
- A pint figure from 16 ounces up. At 1 pint or more, the rule follows the ounces with the largest whole units in parentheses, so a 16 ounce can’s statement is 16 fl oz (1 pt), and a 24 ounce can’s is 24 fl oz (1 pt 8 fl oz) or 24 fl oz (1.5 pt). A 12 ounce can needs no parentheses.
- Metric too. The Fair Packaging and Labeling Act (15 U.S.C. 1453(a)(2)) calls for both inch pound and SI metric units on the panel. FDA’s rule text says a metric statement may also appear.
- No percentage tolerance in that rule. Section 101.7(q) recognizes reasonable variations caused by moisture loss or gain in good distribution practice, or by unavoidable deviations in good manufacturing practice, and says they shall not be unreasonably large. One guide gives an FDA tolerance of 3 or 5 percent; 101.7 states no percentage.
A closed multipack states the count, the size and the total. Under 101.7(s), a carton of identical cans that could each be sold alone carries the number of cans, the ounces in each and the total in parentheses. A 12 pack of 12 ounce cans states 12 cans, 12 fl oz each and 144 fl oz in total; a 6 pack of 12 ounce cans states 72 fl oz. An open multipack that does not hide how many cans there are or block their labels is exempt, as long as each can’s own label meets the placement and type size rules. How tall the statement’s type must be depends on the panel’s area, which our water bottle label guide works through for a round container.
How Can Size Sets the Serving on the Label
FDA’s reference amount for soda is 12 fl oz (360 mL), covered with the other reference amounts in our guide to how much 8 ounces is in cups. Under 21 CFR 101.9, a drink sold on its own that holds less than twice the reference amount is labeled as one serving. From twice up to three times, the label carries two columns, one per serving and one for the whole container. The table below is for soda and the other drinks that share its 360 mL reference; milk, for one, has a 240 mL reference, so its thresholds are lower.
| Soda can | Nutrition Facts |
|---|---|
| 7.5, 12 or 16 oz | One serving, the whole can |
| 19.2 oz | One serving; a second column per household measure is optional above 150 percent |
| 20 oz | One serving, FDA’s own example for soda |
| 24 oz | Two columns in FDA’s own example, a 24 ounce bottle of soda |
| 25.4 oz | Two columns |
FDA’s page on the Nutrition Facts changes, content current as of March 28, 2024, gives both soda examples and notes that the soda reference rose from 8 to 12 ounces.
Fitting Cans into a Carrier or Carton

The space cans take up in a pack starts with the body diameter. With the cans touching and nothing yet added for walls, dividers or clearance:
| Pack | Standard, 66 mm | Sleek, 58 mm |
|---|---|---|
| 4 (2 by 2) | 132 × 132 mm (5.20 × 5.20 in) | 116 × 116 mm (4.57 × 4.57 in) |
| 6 (2 by 3) | 132 × 198 mm (5.20 × 7.80 in) | 116 × 174 mm (4.57 × 6.85 in) |
| 8 (2 by 4) | 132 × 264 mm (5.20 × 10.39 in) | 116 × 232 mm (4.57 × 9.13 in) |
| 12 (3 by 4) | 198 × 264 mm (7.80 × 10.39 in) | 174 × 232 mm (6.85 × 9.13 in) |
Height comes from the can: 122.22 mm for Crown’s standard 12 ounce, 156.59 mm for its sleek 12 ounce and 157.23 mm for its 16 ounce. Measure a filled sample of your own can before you settle a size.
Custom Boxes Deals makes cardboard can carriers for 2, 4, 6 or 8 cans, energy drink packaging for single cans and multipacks, and beverage boxes with handles. Carriers and boxes can take die cut dividers, partitions and carry handles. Tell us the can format, standard, sleek or slim, along with the ounces. Printing is CMYK, Pantone or PMS, or unprinted. Send your artwork and we will tell you how it will reproduce on the stock you have picked.
Frequently Asked Questions
How many mL is a 12 oz can?
354.88 mL, from NIST’s fluid ounce. Crown lists its 12 ounce cans as 355 mL.
How many ounces is a mini can of soda?
All four guides benchmarked for this post call the 7.5 ounce can a mini can. That size holds 221.80 mL, and Crown and Ball both list it in their sleek lines.
Are all 12 oz cans the same size?
No. Crown’s standard 12 ounce can is 66 × 122.22 mm and its sleek 12 ounce can is 58 × 156.59 mm. Both hold 12 fluid ounces.
How many cups are in a can of pop?
About 1.5 US cups. NIST’s factors put a US cup at 236.59 mL, which is 8 US fluid ounces. Our milliliters to cups guide covers the other cup sizes.
Is a 16 oz can a pint?
Yes. NIST’s factors put a US liquid pint at 473.18 mL, which is 16 US fluid ounces. Ball’s 568 mL can, about 19.2 US fluid ounces, is the size Ball says is often called an imperial pint in the United Kingdom.
How many ounces are in a can of pop outside the US?
It depends on the market. A 330 mL European can is 11.16 US fluid ounces, a 375 mL Australian can is 12.68, and a 350 mL can, common in Japan, is 11.83.
How much does an empty can weigh?
About half an ounce, or 14 g, for a US size can in 2011, per Wikipedia’s article on drink cans.
