Request Your Custom Quote
Tell us what you need. Our team normally replies within one business day.
Labubu Box Template: Size It to Your Figure, Not to the Original Box
By A Labubu box template is a printable flat layout you cut, fold and glue into a box for a Labubu figure. The size matters more than anything else, and Labubu figures are not all one size: Pop Mart lists them by series, and its own pages say measurements can vary. So measure your own figure and add clearance. Decorate the box with your own artwork rather than copying Pop Mart’s box, whose artwork and design are Pop Mart’s own.
Labubu is a character designed by Kasing Lung and sold by Pop Mart. Custom Boxes Deals is not affiliated with Pop Mart.
Labubu Figure Sizes by Series
Pop Mart’s US store lists a size for each series, as on its Big into Energy page. Here are three, as of October 2026:
| Series | Pop Mart’s listed size | Pop Mart’s stated variation |
|---|---|---|
| Big into Energy, vinyl plush pendant | 17 cm (6.69 in) high, without the hanging loop | 0.4 to 1.2 in |
| Hair Salon, vinyl plush pendant | 9.5 × 8 × 17.5 cm (3.74 × 3.15 × 6.89 in) | 0.19 to 0.39 in |
| Pin for Love, vinyl plush pendant | 6 × 5 × 10.5 cm without the loop, 17.5 cm high with it | Not quoted here |
Two details are worth knowing. Pop Mart’s Big into Energy page says actual measurements may vary by 0.4 to 1.2 inches, which is a lot for a snug box. And its Pin for Love page prints the 5 cm side as 1.79 inches, when 5 cm is 1.97 inches. Measure the figure you actually have.
How to Size a Box for Your Labubu
- Measure the figure at its widest points, including ears, arms and anything that sticks out.
- Decide on the loop. For a pendant, the hanging loop can add several centimeters. Pin for Love goes from 10.5 cm to 17.5 cm with it.
- Add clearance on each side. The example below adds 1/4 inch on every side, so half an inch to each dimension.
- Check a stock template against your numbers, not the other way round.
| Figure | Figure size | Inside of box, with 1/4 in each side |
|---|---|---|
| Hair Salon | 3.74 × 3.15 × 6.89 in | 4.24 × 3.65 × 7.39 in |
| Pin for Love, without loop | 2.36 × 1.97 × 4.13 in | 2.86 × 2.47 × 4.63 in |
| Big into Energy, height only | 6.69 in high | 7.19 in high; measure the width and depth |
Pacdora’s free template tool calls 3 to 5 inches high the “most commonly referenced” size for a Labubu box. Its height range would cover Pin for Love without its loop, but its 1 to 2 inch depth is less than that figure’s 5 cm side, about 2 inches, plus clearance. It will not hold a 17 cm figure, which is about 6.7 inches tall before any clearance.
If you are storing the original Pop Mart box rather than the figure, measure the box instead. One display case maker sizes its case for the Big into Energy blind box at 5.9 × 4 × 3.2 inches.
Where to Get a Labubu Box Template
There are two routes:
- Draw your own. The guide on how to make a box template walks through drawing a box net by hand or on a computer, from the sizes you worked out above.
- Use a template tool. Pacdora’s Labubu box template lets you set the height, width and depth and download a dieline. The guide to the best online packaging design tools covers what Pacdora’s free tier includes.
Print on heavy card stock, score the fold lines before folding, and test fit the figure before gluing the last tab.
What Not to Copy
The source page for this post notes that some collectors use a design “quite similar to the original box”. That is the line to stay behind. The artwork, logo and box design are Pop Mart’s, so leave them off any box you make or sell.
The problem is real. Wikipedia’s Labubu entry says imitation dolls, often called “Lafufu”, have been sold globally, and that Pop Mart has taken legal action, including a lawsuit in California against a convenience store chain. In November 2025, US Customs and Border Protection reported seizing 17,634 counterfeit children’s items at Norfolk, Virginia, which bore the protected trademarks and copyrights of brands including Labubu.
Downloaded templates need the same care. Etsy’s Labubu template market lists templates alongside character clipart and SVG files. Pacdora’s own FAQ says its templates suit commercial use “as long as the designs are original or properly licensed.” The safest template is a blank one you decorate with your own artwork.
How to Tell a Genuine Pop Mart Box From a Fake
If you keep the original boxes, Wikipedia gives two signs of a fake that concern the packaging: an invalid or blurry QR code on the box, and no Pop Mart branding. It adds that many fakes have more than nine teeth. A box that fails either check is worth a second look before you pay collector prices for it.
Windows and Inserts for a Display Box
- A window lets you see the figure without opening the box. Cut the opening in the front panel and patch it with clear film from the inside.
- An insert holds the figure upright so it does not slide or rest on its face. A simple card insert with a cut out for the base can be enough for one figure.
Custom Boxes for Your Own Figures and Products
If you sell your own collectibles or want a run of matching display boxes, Custom Boxes Deals makes blind boxes and action figure packaging to your size, with windows and fitted inserts. Printing is CMYK, Pantone or PMS, or unprinted. This covers boxes printed with your own artwork.
Frequently Asked Questions
What size box do I need for a Labubu?
It depends on the series. Pop Mart lists the Hair Salon figure at 9.5 × 8 × 17.5 cm and the Big into Energy figure at 17 cm high without its loop. Measure your figure and add clearance on every side.
Is there a free Labubu box template?
Pacdora offers a free template tool where you set the size. You can also draw your own net from your figure’s measurements.
Can I copy the original Pop Mart box?
No. Its artwork, logo and design belong to Pop Mart. Decorate a blank template with your own artwork instead.
How can I tell if a Labubu box is fake?
Wikipedia lists an invalid or blurry QR code on the box and missing Pop Mart branding as signs of a fake.
Anthony Kim
Hello, I'm Anthony Kim, a seasoned packaging consultant and designer. With a professional journey spanning over four years, I've evolved from a budding designer to a recognized expert in the field. Currently holding the position of Packaging Consultant, I've honed my skills in creating not just visually stunning packaging but also solutions that align with strategic business goals.
View all articles →
